Downloading, Changing, Modify Parameters and Settings in SCCOM / SC20COM

How to change / modify parameters in the SCCOM:

1. Ensure the inverter is in a safe state to modify the parameters you would like to change. Important to note that most parameters will require the inverter to be in the "Stop" position.
   1. To do this remotely, consider setting the "SpntRemEna" parameter to stop the inverter.
   2. Occasionally, you may need to change a parameter while the inverter is running. If you have determined it safe to modify the parameter, consider using the "ParaChangeEna" parameter to allow modification while the inverter is running.
2. Be sure to save all parameters before and after any changes are made
3. Login to the inverter
4. Click on the serial number on the left-hand side of the screen
   1. If the serial number link doesn't work or if the SCCOM doesn't have communications with the inverter, try redetecting the inverter. See THIS article. 
5. Click on the parameter tab at the top
6. Scroll down to the parameter you would like to change, edit the value, and then scroll to the bottom of the page to select "Save". 

How to save / store / download a parameter set in the SCCOM:

1. Login to the inverter and navigate to the parameter tab.
2. Scroll all the way to the bottom, click the "mark all" tab and click the "Snapshot" button to record a copy of all parameters.
3. Download the most recent file written at the time of the "Snapshot".