Description - The internal phase lock loop has failed.
Troubleshooting - Turn the DC and AC off, restart the inverter. If problem persists, the inverter may need to be inspected and serviced by an authorized service provider.
Customer Solution Portal
Related Articles
- Error Code - 1 - Contactor Fail - Y
- Error Code - 2 - CT Failure - Y
- Error Code - 3 - DC GND Fault - Y
- Error Code - 4 - Desat Error - Y
- Error Code - 5 - IGBT Overtemp - Y
- Error Code - 6 - MOV Fault - Y
- Error Code - 7 - NTC Failure - Y
- Error Code - 8 - Open Phase - Y
- Error Code - 9 - RCM Fault - Y
- Error Code - 10 - Shunt Trip - Y
- Error Code - 11 - Vsense Error - Y
- Error Code - 12 - AC Islanding - Y
- Error Code - 13 - Current Limit - Y
- Error Code - 14 - DC Cont. Err - Y
- Error Code - 15 - DC Overshoot - Y
- Error Code - 16 - DC Volt High - Y
- Error Code - 17 - DC Volt Low - N
- Error Code - 18 - Fac High - Y
- Error Code - 19 - Fac Low - Y
- Error Code - 20 - Fac Very Low - Y
- Error Code - 21 - Fan Life Reached - Y
- Error Code - 22 - Filter Cont. Err - Y
- Error Code - 24 - Hw Interlock - N
- Error Code - 25 - Low DC Power - N
- Error Code - 26 - Master NTC Error - Y
- Error Code - 27 - MPP Tracking - N
- Error Code - 28 - Nameplate Limits - Y
- Error Code - 29 - Other PB Fault - N
- Error Code - 30 - Outside MPPT - N