Grid parameter locked
Changes to the grid parameters are now blocked. In order to be able to make changes to the grid parameters, from now on you must log in using the SMA Grid Guard code.
Customer Solution Portal
Related Articles
- Event Number - (101-105) - Grid Voltage High
- Event Number - (202-206) - Utility Grid Disconnect
- Event Number - (401-404) - Grid Disconnect , Change in Power Frequency
- Event number - 501 - Power Frequency Error
- Event Number - 601 - Excessive DC in Grid
- Event Number - 701 - Power Frequency Error
- Event Number - 1001 - L & N Connection Swap
- Event Number - 1302 - L & N Not Connected
- Event Number - 1501 - Value/Country Data Error
- Event Number - (3301-3303) - DC Input Low power
- Event Number - (3401-3407) - DC Overvoltage
- Event Number - 3501 - Insulation Error
- Event number - 3601 - High Discharge Current
- Event Number - 3701 - Residual Current High
- Error Number - 3801 - DC Overcurrent
- Error Number - (3901-3902) - DC Start Conditions Error
- Event Number - 4301 - Electric Arc Detected
- Event Number - 6512 - Minimum Temperature Error
- Event Number - (6701-6702) - Communication Disturbance
- Error Number - 6803 - Input A Failure
- Error Number - 6903 - Input B Failure
- Event Number - 7106 - Update File Failure
- Event Number - 7110 - Update File Not Found
- Error Number - 7112 - Update File Copied
- Event Number - 7113 - The memory card is full or write-protected
- Event Number - 7303 - Main CPU Update Failure
- Event Number - 7324 - Update Connection Failure
- Event Number - 7331 - Update Transport Started
- Event Number - 7332 - Update Transport Successful
- Event Number - 7333 - Update Transport Failure