DC overvoltage > Disconnect generator
Overvoltage at the DC input. This can destroy the inverter. This message is signalized additionally by rapid flashing of the LEDs.
Corrective measures:
• Disconnect the inverter from voltage sources immediately .
• Check whether the DC voltage is below the maximum input voltage of the inverter. If the DC voltage is below the maximum input voltage of the inverter, reconnect the terminal block with the connected DC conductors to the inverter.
• If the DC voltage exceeds the maximum input voltage of the inverter,ensure that the PV array has been correctly rated or contact the installer of the PV array.• If this message is repeated frequently, contact the Service .